CNC Milling - 5 Axis

  • 1 Haas UMC-750

    5-Axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. A quick solution for 3+2 machining and simultaneous 5-Axis machining-dual-axis trunnion table with a 500mm diameter platter that provides +110 and -35 degrees of tilt and 360 degrees of rotation. 40+1 side mount tool changer with wireless intuitive probing system.

  • 1 Haas VF-2TR

    Our smaller 5-Axis machining centre offers 762 X axis, 406 Y axis, 508 Z axis and spindle nose to table 610mm. 30 +1 side mount tool changer with wireless intuitive probing system, offering a quick solution to 5-Axis machining.

CNC Milling - 3 & 4 Axis

  • 1 Haas VF4 with 4th axis and tool probing

    X1270 : Y508: Z635

  • 1 Doosan DNM 400 and tool probing

    X762 : Y435 : Z510

  • 2 Haas VF 3 with 4th axis

    X1000 : Y500 : Z520

  • 1 Haas VF 2 with 4th Axis

    X750 : Y400 : Z350

  • 1 Haas VFO E with 4th Axis

    X750 : Y400 : Z350

  • 1 Haas VFO with 4th Axis

    X750 : Y400 : Z350

  • 1 Haas Mini Mill

    X406 : Y305 : Z254

Manual Milling

  • 2 Ajax / Brideport Manual Vertical Mills

    With DRO’S & Slotting Heads

Boring

  • 1 Newall Jig Borers

    With Jig grinding and diamond turning attachments.

CNC Turning

  • 1 Doosan Puma 3100LM CNC Lathe with C Axis-Driven Tooling

    Swing-420mm. Max between centres-1280mm. Max bar diameter-102mm.

  • 1 Doosan Puma 2600M CNC Lathe with C Axis-Driven Tooling

    Swing-376mm. Max between centres-760mm. Max bar diameter-76mm.

  • Microcut BNC 2440X CNC Lathe

    Swing-650mm. Max between centres-1500mm.

  • XYZ Proturn SLX/RLX 425 Lathe

    Swing-480mm. Max between centres-1250mm. Max bar diameter-80mm.

Manual Turning:

  • 1 Feeler Manual Lathe.

Quality Assurance

EDL hold the BS EN 9100:2009 accreditation and operate a dedicated quality control service for the manufacture of casting products and components. The inspection department which is staffed by five permanent highly skilled and experienced engineers, is fully equipped to handle all dimensional inspection processes, as well as facilities for non destructive testing as below.

Depending on your requirements, we can offer a wide range of inspection programmes to suit the product.

Full Details